|
 |
30 Days 100%
Iron-Clad Money Back Guarantee
We only want satisfied customers. There for, we offer a 30-days 100% iron-clad money back guarantee. If you are not satisfied with our sawmill or planer, we want it back.
20-years of
Hands On Experience
We have 20 years of hands on experience designing and working directly with Logosol equipment.
Logosol Sawmill
2 Year Warranty
Logosol will replace any part of the sawmill found to be defective within two year of purchase.
Unlimited Worldwide service
Your local area distributor provides maintenance service in your country.
Logosol Husqvarna
3 year Warranty
On the Chainsaw Husqvarna 385XP we have a unique 3 year warranty.
Logosol Planer
2 Year warranty
All our planers have 2 year warranty for replacement of parts other then normal wear and tear.
|
|
Sawmill Shootout 2003 - Timberjigg and M7 set records!
Rob Bjorklund, Logosol Factory Rep, and Robert Seidell, an M7
owner from Michigan, participated in the 2003 Independent Sawmill and
Woodlot Management Magazine's Great Portable Sawmill Shootout held at
the NorthEast Forest Products Equipment Expo in Bangor Maine.
The Timberjig - first hand held sawmill ever to participate!
For
the first time ever in this event, they ran a hand held sawmill, the
Logosol Timber Jig! Their competition with the Timber Jig was in the second
timed event on Saturday, and they were working directly next to the biggest
bandmill in the competition.
Rob was excited about their preformance, "We are really stoked about
how well we did in this competition!" he told us. "We cut some
great lumber with the Timber Jig in record time!"
Here are the official results from the Shootout for the Timber Jig:
Timberjig results
| Total Time: |
89 mins 55 secs |
| Time Out: |
11 mins 35 secs |
| Log Scale: |
506 Board Feet |
| Actual Working Time: |
78 mins, 20 Secs |
| Lumber Scale: |
291 B.F. |
| BF/Hour: |
223 B.F. |
| LRF (Lumber Recovery Factor): |
.58 |
| Rejected Lumber(Miscuts): |
16 |
The Logosol Team started with 4 logs that scaled out to contain 506 board
feet of lumber. One of these was 25" in diameter! They used the Timber
Jig to cut 291 B.F. of lumber in under 80 minutes of working time. And
if you've been wondering if the Timber Jig will actually cut quality lumber,
you can see from these stats that it definitely will. They only had 16
board feet of lumber that was classified as a miscut by the lumber inspector.
The Timberjig had better precision than some of the bandsaws!
The lumber inspectors were certified lumber inspectors and inspected
the lumber produced according to lumber standards for that area. Some
of the biggest sawmills in the competition had a lot more miscuts. Some
had 85 board feet of rejected lumber. One big band mill had 77 board feet
of rejects. Only 3 mills had no rejected lumber and one of those was the
Logosol M7 sawmill, which Rob and Bob ran in the Friday competition. All
of the mills were cutting 2" lumber this year.
The M7 blew the old record away!
The Logosol Team pushed the M7 sawmill to a new record this year.
They broke the 200 Board Feet per hour barrier for the first time. Their
stats show a much higher lumber recovery factor of .90. This LRF is higher
than two of the circular sawmills that competed in the event. The bandmills
in the event averaged over 1.05 in their LRF's. And the Logosol Team proved
this mill produces consistent quality lumber. The M7 is one of only 3
mills that had no miscuts in this event. Of course the two other sawmills
that accomplished this were mills that cost thousands more than the M7
sawmill.
In both events, the Logosol Team used the Husqvarna 395XP chainsaw as
their powersource.
All in all it was a great showing for Logosol! We appreciate the opportunity
to compete in this event offered by Independent Sawmill & Woodlot
Management Magazine.
Logosol M7 results
| Total Time: |
111 mins 57 secs |
| Time Out: |
6 mins 10 secs |
| Log Scale: |
535 Board Feet |
| Actual Working Time: |
105 mins,47 Secs |
| Lumber Scale: |
480 B.F. |
| BF/Hour: |
272 B.F. |
| LRF (Lumber Recovery Factor): |
.90 |
| Rejected Lumber(Miscuts): |
0 |
The Logosol Team pushed the M7 sawmill to a new records. They broke the
200 Board Feet per hour barrier for the first time. Their stats show a much
higher lumber recovery factor of .90. This LRF is higher than two of the
circular sawmills that competed in the event. The bandmills in the event
averaged over 1.05 in their LRF's. And the Logosol Team proved this mill
produces consistent quality lumber. The M7 is one of only 3 mills that had
no miscuts in this event. Of course the two other sawmills that accomplished
this were mills that cost thousands more than the M7 sawmill.
In both events, the Logosol Team used the Husqvarna 395XP chainsaw as
their powersource.
The Sawmill & Woodlot wrote after the Shootout:
"Logosol didn't only break the 200 board feet / hour, they
blew it away, turning 480 board feet of lumber in 105 minutes and
47 seconds, for a cutting rate of 272 board feet per hour, and a
lumber recovery factor of 0.90. Plus, they had no miscuts."
|
All in all it was a great showing for Logosol! We appreciate the opportunity
to compete in this event offered by Independent Sawmill & Woodlot
Management Magazine.
» Read the
article about the M7 in Sawmill and Woodlot (135 kB pdf)
|
 |
|
Web Store 
