|
|
 |
30 Days 100%
Iron-Clad Money Back Guarantee
We only want satisfied customers. There for, we offer a 30-days 100% iron-clad money back guarantee. If you are not satisfied with our sawmill or planer, we want it back.
20-years of
Hands On Experience
We have 20 years of hands on experience designing and working directly with Logosol equipment.
Logosol Sawmill
2 Year Warranty
Logosol will replace any part of the sawmill found to be defective within two year of purchase.
Unlimited Worldwide service
Your local area distributor provides maintenance service in your country.
Logosol Husqvarna
3 year Warranty
On the Chainsaw Husqvarna 385XP we have a unique 3 year warranty.
Logosol Planer
2 Year warranty
All our planers have 2 year warranty for replacement of parts other then normal wear and tear.
|
|
Technical data |
Working measurements |
| Maximum board stack for Stack Cutter 1500: |
| Max. width: |
1450 mm |
| Max. height: |
1450 mm |
Dimensions |
| Stack Cutter outer measurements. |
| Length: |
2600 mm |
| Width: |
1100 mm |
| Height: |
1900 mm |
Electrical system and motor |
| The electrical motor is a specially wound, Danish ABB motor with a rated output of 5kW. While cutting, the motor load is 7-8000 W. It is protected by a temperature sensor. |
| Total continous output: |
5 kW |
| Electricity supply: |
3-Phase 16A , 400V |
| Insulation class: |
IP54 |
| This insulation class means that the motor and the entire electrical system are unaffected by running water, thus capable of standing outdoors in the rain. |
Sound level and ergonomics |
The Stack Cutter 1200 is designed to provide the user with the best possible working conditions. The controls are positioned at work height and a Plexiglas sheet protects the operator against any flying chips.
The sound level requires hearing protection. |
| Acoustic pressure: |
102,0 dB (A) |
| Acoustic power: |
113,0 db (A) |
| Vibrations in the controls: |
Very slight |
Cutting equipment |
| Logosol has a deep experience with different cutting machines and have chosen a standard 3/8” cross-cutting chain for the Stack Cutter. |
| Chain pitch: |
3/8 inch |
| Chain speed: |
22,5 m/s
|
Chip handling |
The Stack Cutter works perfectly well without any chip transport equipment. However, since this will create considerable quantities of chips on the work site, a chip fan is recommended.
A simple chip fan is included with the Stack Cutter 1200 as an accessory
to be fitted on the Stack Cutter support legs. Connecting the Stack Cutter
to existing chip evacuation systems works equally well. |
| Chip outlet (connection for flexi-hose): |
100 mm |
| Min. chip fan capacity needed: |
700 m3/h
|
- Lightweight and sturdy structure constructed from aluminium beams - 100%
anticorrosion protection.
- Levelling sight assures precise alignment of sawing line.
- Automatic saw lubrication by means of large transparent oil
reservoir.
|
- Can be bolted to the ground for stationary use.
- Levelling arm to position the kerf.
- Crank operated vertical angle adjustment.
- Large wheels for easy movement.
|
- Wood chip collection channel 4" (100 mm).
- Capable of sawing stacks up to 1.5 m x 1.5 m (5 ft x 5 ft).
Precision +/-2 mm.
- Maximum motor power 10kW.
- Crank operated lifting and lowering of the saw unit.
|
|
 |
|
Web Store 
