|
|
 |
30 Days 100%
Iron-Clad Money Back Guarantee
We only want satisfied customers. There for, we offer a 30-days 100% iron-clad money back guarantee. If you are not satisfied with our sawmill or planer, we want it back.
20-years of
Hands On Experience
We have 20 years of hands on experience designing and working directly with Logosol equipment.
Logosol Sawmill
2 Year Warranty
Logosol will replace any part of the sawmill found to be defective within two year of purchase.
Unlimited Worldwide service
Your local area distributor provides maintenance service in your country.
Logosol Husqvarna
3 year Warranty
On the Chainsaw Husqvarna 385XP we have a unique 3 year warranty.
Logosol Planer
2 Year warranty
All our planers have 2 year warranty for replacement of parts other then normal wear and tear.
|
|
| Photo |
  |
|
|
| ARTICLE NO. | PRODUCT | PRICE INFO | | | Excl. VAT | | 7103-000-0305 | Multi-Planer MH410 | $5900 |  |
Multi-Planer MH410
Logosol’s multi-planer is a jointer, a planer and a moulder in one and the same machine. Furthermore, you can use it as a vertical milling machine equipped with a feeding unit. Unleash your creativity – the possibilities are endless!
No resetting between jointing, planing and moulding
To start with, you have a perfect jointer/planer, but it is also equipped with a side cutter. The construction is completely unique. You plane the width and thickness in one single operation. With the side cutter you can also mould the timber. This means that you can make tongued and grooved flooring, for instance.
When you are using the machine as a moulder, you machine the timber twice in order to process the workpiece on all four sides. Compare this with a standard jointer/planer or a vertical milling machine, in which you have to machine the workpiece at least four times.
Thanks to the width of the planer table, you can use the part closest to the side cutter for mouldings and the other part for planing operation. This gives you a machine that does not require any resetting between jointing, planing and moulding. It is this unique combination that gives you all the possibilities!
The natural choice in small joinery workshops
The efficiency and the precision increase dramatically when using the multi-planer instead of a traditional jointer/planer or a vertical milling machine. The reason for this is that the workpiece first is machined on two sides by the jointing operation, and then it can be planed and mould on the remaining two sides in one single operation. This is of great use to you if you, for example, are producing joinery components.
You do not need any extra floor space, since you at a reasonable price get both efficiency and several valuable operations in one and the same machine. Due to this the multi-planer MH410 is the natural choice for you who require high efficiency and precision.
Flexible planing
When delivered, the horizontal cutter is equipped with two planing knives, but the cutter can take a total of four planing knives. So, you can mount two additional knives when you want an extra fine surface finish. Normally, the two additional knife tracks are used for moulding knives. Even though the maximum protrusion of a moulding knife in the horizontal cutter is 2 mm, it is possible to produce several different profiles on the plane side of the workpiece.
Reliable feeding
In its standard design the machine is equipped with two ribbed steel rollers in front of the cutter and a rubber roller on the out-feed side. If required, the machine can be equipped with only rubber rollers. A separate motor runs the feed rollers via a robust chain transmission, which gives a very reliable feeding. As an accessory, there is a steplessly adjustable feeding.
High quality gives safety and precision
The entire machine is built around the heavy cast iron table to give as high stability and durability as possible. The machine’s simple but robust design makes it secure and easy to survey so that you can feel safe while operating it.
Technical data |
Jointing |
| Jointer table width: |
310 mm |
| Jointer table length: |
1400 mm |
| Cutting depth, jointer: |
0-10 mm |
| Size of the fence: |
152 x 1100 mm |
Planing |
| Planer table width: |
410 mm |
| Planer table length: |
630 mm |
| Planing width: |
max. 410 mm |
| Planing height: |
max. 260 mm |
| Cutting depth, planer: |
max. 4 mm |
Horizontal cutter |
| Cutter head diameter: |
72 mm |
| Number of revolutions: |
6000 rpm |
| Protrusion, profile knives: |
max. 2 mm |
| Cutting depth: |
max. 4 mm |
| Motor: |
3 kW (4 hp) |
Vertical side cutter |
| Spindel axle diameter: |
30 mm |
| Cutter head diameter: |
72 mm |
| Number of revolutions: |
6000 rpm |
| Motor: |
2,2 kW (3 hp) |
Feeding |
| Feed roller diameter: |
32 mm |
| Number of feed rollers: |
3 |
| Feeding speed: |
5 m/min |
| Motor: |
0,18 kW (0,25 hp) |
| Feeding speed (variable): |
2-12 m/min |
| Motor (variable feeding): |
0,37 kW (0,5 hp) |
Weight and electrical system |
| Weight: |
245 kg |
| Electrical system: |
3-phase 400V 50 Hz |
| Thermal cut-out: |
On every motor |
|
 |
|
Web Store 
