|
|
 |
30 Days 100%
Iron-Clad Money Back Guarantee
We only want satisfied customers. There for, we offer a 30-days 100% iron-clad money back guarantee. If you are not satisfied with our sawmill or planer, we want it back.
20-years of
Hands On Experience
We have 20 years of hands on experience designing and working directly with Logosol equipment.
Logosol Sawmill
2 Year Warranty
Logosol will replace any part of the sawmill found to be defective within two year of purchase.
Unlimited Worldwide service
Your local area distributor provides maintenance service in your country.
Logosol Husqvarna
3 year Warranty
On the Chainsaw Husqvarna 385XP we have a unique 3 year warranty.
Logosol Planer
2 Year warranty
All our planers have 2 year warranty for replacement of parts other then normal wear and tear.
|
|
Click on the image to enlarge it.
|
|
|
| Photo |
 |
|
|
| ARTICLE NO. | PRODUCT | PRICE INFO | | | Excl. VAT | | Bai-45310 | Speedmaster Grinder | $169.50 |  | | 9999-000-0620 | Filing Vice 39 cm | $57 | | | Ahl-SV260 | Bar Vise | $9.95 | | | Ahl-13025 | Bar Edging File | $32.50 | | | Bai-44918 | Speedmaster Extra Grind Stone | $10 | | | 9999-000-0400 | Pferd Filing Gauge 5/32" (4,0 mm) | $20 | | | 9999-000-0410 | Pferd Filing Gauge 3/16" (4,8 mm) | $20 | | | 9999-000-0420 | Pferd Filing Gauge 7/32" (5,5 mm) | $20 | | | 9999-000-0401 | Round File 5/32" (4,0 mm) | $1.40 | | | 9999-000-0411 | Round File 3/16" (4,8 mm) | $1.40 | | | 9999-000-0421 | Round File 7/32" (5,5 mm) | $1.40 | | | 9999-000-0435 | Flat File 5/32 (4,0 mm) | $10 | | | 9999-000-0430 | Flat File 7/32 (5,5 mm) | $12 | | | 9999-000-1515 | Chain Sharpening Robot | $1195 | |
Filing Gear
Sharpen the chain before it gets dull
LEARN HOW TO RECOGNIZE THE SIGNALS
of a chain beginning to be dull. If
you fi le the chain before it gets dull it
only needs a few light strokes with the
fi le on each cutting tooth. There is practically
no wear and tear on the chain and
bar when the chain is sharp. If the chain
has been damaged or unevenly fi led it
can start pulling sideways. This can also
occur when the guide bar is so worn that
the chain touches the bottom of the bar
groove. Check that the cut goes straight
by watching the distance between the
guide bar and the fresh-cut surface when
the saw is pulled back. If the chain is
pulling sideways, the guide bar gets worn
unevenly and even a new chain will then
steer in the wrong direction. The guide bar
can be fi led with a UFK edge file.
|
 |
|
Web Store 
