 |
|
||
| One man portable sawmill! | Logosol International | Sign in |
 |
Web Store 
|
Handles most sizesThe sawmill can work with all standard shape logs up to 5m length. Extensions are available to easily add length to process longer logs. Half metre extensions are normally added to provide extra length and support for longer logs. The low profile chain is available in 40cm, 50cm and 63cm cutting lengths to handle most log diameters (even longer chains can be added to handle those extra large logs). Logs too large to place on the sawmill can be cut by placing the sawmill on the log.Quick AssemblyThe mill, when assembled, will cut accurately. Because of the high quality and precision of the parts, none of the angles need setting. The only adjustment required is for the cutting height and once that is set, the mill is accurate in all dimensions. PortableThe entire sawmill is made of anodised extruded aluminium and weighs only 52kg (115lbs) - it can easily be carried by one person and transported on a car roof-rack to remote areas. Move the mill, not the logs. Strong constructionMade of anodized, extruded aluminium, the mill is extremely strong for it's size, easily supporting and lifting over ten times it's weight. The aluminium is of the highest quality available, in the same class as that used for aircraft construction. Ergonomic constructionThis mill is designed with the operator in mind. Everything is at the right height for long hours of operation without back strain. It is easy to use - no pushing the saw through the wood. Easy maintenanceThe M7 is rust proof - all parts are weather resistant. Anodised aluminium, stainless steel bolts and nylon slides are used in the construction. There is very little to break, adjust or wear out in this mill. The work siteThe logs are best handled on log tables and the sawmill is designed to allow the logs to be rolled directly from the log table onto the log bed and to be sawn at working height. Accurate sawingThe log is placed on one or two log shelves which can be moved up and down. One end of the log is held in place by a spiked bumper. The saw runs on a straight guide rail and saws the log very accurately. The special chain and blade allows the chain saw to cut straight with very high accuracy even in low grade quality saw logs. No "band-saw waves". Smooth surface finishThe surface is so smooth on lumber finished with the M7, it can be finished with a belt sander. With the ease of log handling and positioning, using the independent log bed suspension, you can maximise the cutting of the log to produce the best lumber. Unique, low-profile ripping chainThe chain used on this sawmill is manufactured by the world's leading chainsaw manufacturer and has been proven as a reliable cutting solution, and produces an amazingly smooth surface. This narrow chain takes only ¼" (6mm) kerf. Easily sharpened, these chains will last through 3000 bd. Ft of cutting. SafeThis sawmill has been designed with safety in mind. The chain pulls the wood against the bed, firmly holding it in place while cutting. The use of the mill involves both hands, keeping the possibility of accidents at a minimum. Independent log bed suspensionThe two Log beds move up and down, separately allowing for easy levelling of the log to achieve the most productive cut. This feature also provides the ability to produce tapered and angle cuts. Log bed raises in two incrementsYou can easily switch from ¼" (6mm) to 1/8" (3mm) increments to produce lumber to the accuracy desired. Three pulleys combined with a nylon poly line provide maximum lifting capacity. Easily lifts a log up to 500kg (1100lbs). Instruction manualEach M7 comes with a 34 page instruction manual.
|
 |
|
|
|||||||||||||
|
|
|||||||||||||