Technical data
Fits on most brands of band sawmills, e.g. LumberMate and Woodmizer.
Rail width standard 825-960 mm (32 9/16"-37 7/8"). Suitable for both narrow, flat and angled rail types. Flexible wheel suspension which can guide on the inner or outer side, or both sides, of the rails. If the width of the rails does not correspond, adaptor plates can be made for you. The same is true if the two rails have different heights. There are adaptors ready for Jonsered/Lennartsfors/Serra-Filius, Woodmizer LT15, etc.
Measurements and weight
Length: 720 mm (28 3/8")
Height: 1000 mm (39 7/16")
Width: 1400 mm (55 ¼")
Weight: 200 kg (440 lbs)
Lumber dimensions
Max. width: 600 mm (23 11/16")
Height from rails: 600 mm (23 11/16")
Cutter head
Diameter: 72 mm (2 7/8")
Width: 410 mm (16 3/16")
Speed of rotation: approx. 6000 rpm
Max. take-off when planing: 7 mm (5/16")
Max. knife pattern protrusion: 25 mm (1")
Lateral adjustment: 200 mm (7 7/8")
Planing knives are included as standard equipment. The same cutter type as PH260.
Motor options
4 kW (6.5 hp) electrical engine.
9 kW (13 hp) gasoline engine.
Recommended accessories
- Precision log posts, three pack.
- Chip duct
- Chip hose
- Posts with wire for power cable and chip hose.
- Hundreds of different standard molding knives (see our Molding Knives Catalog), including traditional Scandinavian log house molding up to 200 mm (8") wide. Custom-made molding knives can be ordered.