Big Mill Pro
Cut valuable oversized logs professionally.
Components: 1 Big Mill Basic, 1 extra TimberJig, 1 extra guide rail 2.75 m (9 ft), 1 LSG kit, 2 EXT Arms 90 cm (36") or 120 cm (47"), 2 EXT Fixing Plates, 1 Rack & T-bar kit.
Log Diameter: 135 cm (53"), with guide rail steering 105 cm (41").
With Big Mill Pro you can cut logs with very high precision. You can take wide, millimeter accurate cuts through the whole length of the log. The system includes a Big Mill LSG with its two TimberJigs, the mounts from Big Mill Basic, extended arms that hold the two guide rails on either side of the log, and two extra, sturdier fixing plates for the log ends.
Due to the guide rails, you can easily take perfectly guided cuts all the way down to the center of the log. After that, you can use the LSG without guide rails, since you then have a wide and perfectly plane surface that guides the cut. You can also continue to use the guide rails if you rotate the log half a turn and cut it from the other direction. The guide rails can be rotated around the log in fixed 90 degree steps. Raising and lowering is also done in fixed, accurate steps. This enables you to saw edged boards, if desired. The double guide rails can also be fitted together so that you can cut twice the length with the Timberjig. In brief, almost everything is possible with the PRO package.
When placing your order, state which guide bar length you are going to use on your LSG, 90 cm (36") or 120 cm (47"), in order to get the correct length on the arms for the guide rails.
Worth Knowing about the Big Mill System