Keep the cutting equipment in good conditionIf you keep the cutting equipment in good condition you will get the correct dimensions on the timber, chains and guide bars will last longer, and you will saw faster. When rip sawing with a sawmill, the equipment is exposed to extreme stress. Both the motor output and the feeding pressure are several times higher than when cross cutting timber, and the saw is run for considerably longer intervals. This makes special demands on you as a master sawyer and it is especially important that you are attentive, and that your cutting equipment is in good condition.
Download the document, The Handbook for Your Cutting Equipment - A Booklet with Care Instructions |
Saw ChainsIt is important that you choose the right saw chain. Your choice of chain affects the finances, the efficiency, the safety and ergonomics of your work. STIHL supplies the optimum saw chain for all applications, output classes and chainsaw brands.
Go to Saw Chains (Web Store) |
Guide Bars from LogosolThe Logosol guide bar is made of a solid piece of steel, which makes it extra strong. The groove for the chain is milled and holds a very high accuracy, which reduces the risk of wavy patterns on the sawn surface and increases the service life.
Go to Guide Bars from Logosol (Web Store) |
Guide Bars from StihlThe Stihl guide bars is made of three metal plates that are welded together, and of which the middle one is hollowed. The advantage of this is low weight and high stability. The sturdy guide bars can be used for many applications.
Go to Guide Bars from Stihl (Web Store) |
LubricationLogosol's own chain oil mixture that has extra god adhesion. The oil adheres considerably better to the chain than every other oil we have tested. This increases the service life of the cutting equipment.
Go to Lubrication (Web Store) |