Pro Feed (smart controller to drive the saw carriage back and forth)
From a control unit at the end of the sawmill, you can drive the saw carriage back and forth on the rails at an adjustable speed. The pulpit is foldable for an optimal overview when sawing. You don’t have to walk with the saw carriage in noise and chips, and the feed rate is even and optimized for the best results. It has a very ergonomic design and is easy to use.

The feed is combined with the Pro Set, where you can also set the saw cut from the pulpit (raise-lower the saw head) either manually or by setting different “recipes” for how you want to see the next cut. The feed is chain-driven and available for 12V and 400V (petrol saw / electric saw).

Pro Feed requires Pro Set!

Technical data